Software Installation

There are two ways to establish connection to configure MEX: via Autopilot 1x or direct connection.

  • Direct MEX connection

    By default MEX can establish VCP communications over its SCI-A and SCI-B ports. Using any of these connection will be possible to connect it to a PC.

    ../_images/mexpc.png

    Direct MEX connection

  • Via Autopilot 1x

    It is usual to have a MEX in a system that does not allow to directly connect to a PC. In that situation, it is possible to configure an Autopilot 1x that is connected over CAN with MEX. To establish a connection between an autopilot and MEX, please read CEX/MEX - Integration examples section of the 1x PDI Builder manual.

    ../_images/mexap.png

    MEX connection through Veronte Autopilot

Once MEX is connected to a computer, read the MEX Software Manual to configure it.